@article{ali_evaluation_2023,
	title = {Evaluation of the mechanical properties of chopped carbon fibre reinforced polypropylene, polyethylene, polyamide 6, and polyamide 12 composites},
	volume = {74},
	issn = {12225347},
	url = {http://revistaindustriatextila.ro/images/2023/2/06%20ARI%20AL%C4%B0%20INDUSTRIA%20TEXTILA%20no.2_2023.pdf},
	doi = {10.35530/IT.074.02.202214},
	abstract = {In this study, a comparative assessment of the mechanical properties of chopped carbon fibre (CF) reinforced
polypropylene (PP), polyethylene (PE), polyamide 6 (PA6), and polyamide 12 (PA12) composites was performed. A
variation in the composites was obtained by changing the fibre volume fraction of the composite elements under the
same manufacturing method and conditions. After blending reinforcement and matrix materials using the extrusion
method, the composite materials were manufactured in the shape of plates with thermoforming. The composites’ tensile
and 3-point bending tests were carried out, and the surface morphology of the fractured surfaces was examined by
Scanning Electron Microscope (SEM). As the fibre content in all matrices increased, the efficiency of the fibre in the
composites decreased. Finally, ANOVA analysis and mathematical model development by the least square optimization
method were performed to analyse and fit experimental data. As a result of the ANOVA analysis, it was seen that the
matrix type was more effective on the composite than the fibre type. The error of the modelling performed is less than
20\% for the tensile and three-point bending tests.},
	number = {02},
	urldate = {2023-05-07},
	journal = {Industria Textila},
	author = {Ali̇, Ari and Ali̇, Bayram and Mehmet, Karahan and Seçgi̇N, Karagöz},
	month = may,
	year = {2023},
	pages = {175--183},
}